Submersible pump manufacturers to talk about how the sewage pump should be used to maintain

When we use the submersible sewage pump will want to extend its service life, what means can let its life extension? The following manufacturers from Shanghai to talk about simple pump.

    First, the sewage pump if there is any small fault to remember not to let it work, if the pump shaft filler completely wear after the timely addition, then continue to use the pump will leak, so the direct impact is the motor energy consumption, Which in turn can damage the impeller.

    Second, if the sewage pump in the course of the use of a strong vibration at this time must stop to check what is the reason, otherwise the same will cause damage to the pump.

    Third, when the sewage pump at the end of the valve leakage, some people will use dry soil filled into the pump inlet pipe, the water rushed to the end of the valve, this approach is undesirable. Because when the dry soil into the inlet pipe when the pump starts working when the dry soil will enter the pump, then it will damage the pump impeller and bearings, this shortens the pump life. When the bottom valve leakage must take to repair, if very serious it would need to replace the new.

    Fourth, after the use of sewage pumps must pay attention to maintenance, for example, when the pump runs out of the pump to put the water clean, it is best able to remove the water pipes and then rinse with water.

    Fifth, the tape on the sewage pump should be unloaded, and then rinse with water and dry in the light, do not put the tape on the dark and damp places. Pump tape must not be stained with oil, not on the tape coated with some sticky things.

    Sixth, to carefully check whether the cracks on the impeller, the impeller is fixed on the bearing is loose, if there is the phenomenon of cracks and loosening to timely maintenance, if the sewage pump impeller above the soil have to clean up.

    Seventh, the pump and pipeline interface must be sealed, because if there are debris into the sewage pump will cause damage to the internal.

    Eight, the pump on the bearing is the focus of inspection, exhausted after checking whether the bearing wear, if the pump with a long time, then the small ball bearing will be broken, so when the pump is used after the bearing is coated A layer of lubricant to better protect the pump bearings.