where to buy Septic tank with a cutting sewage pump

The use of cutting sewage pump to achieve clean-cut solution
   In septic tanks, bathroom sets of wells containing a large number of solid feces, sanitary napkins and other fibrous media. Septic tanks in the decomposition of the bottom of the pool, the supernatant into the pipeline flow away, artificial regular cleaning septic tanks; in the toilet collection wells in the use of filters to filter solid material, the sewage with sewage pump to enhance, Clean the filter. Regular Qingtao work environment is poor, work intensity and large. The use of cutting pumps in these cases eliminates the need to install a filter, eliminating the Qingtao work, can save the user's expenses.
solution
   Zenit cutting pump can be really chopped filamentous or easy winding of dirt, completely prevent the dirt on the pumps, pipes, valves and other clogging, do not need to install filtering equipment. Its main feature is installed in front of the impeller suction triangular cutting head and cutting blade composition of the cutting system (Figure 1). In the media into the impeller before the sewage into the feces, toilet paper and other solid material chopped, it can be completely avoid clogging.
In the cutting system, the triangular cutter and the impeller rotate synchronously, and the cutting cutter is fixed on the suction front cover. The cutting edge can be adjusted by the adjusting device on the cutterhead or the adjusting gasket on the cutting head to ensure the best cutting effect. Figure 1. Cutting system
   Zenit has a total of seven series of cutting submersible sewage pump, power range of 0.74KW to 7.2KW, the maximum flow of 80m3 / h, the maximum head of 53m, to meet most of the sewage requirements. Triangle cutting head material for the high-chromium alloy steel (X102CrNiMo17Ku), cutting cutter for the stainless steel, cutting in a long time in the little wear and tear.
Figure 2 for the two-pole motor cutting system, triangular cutter and impeller speed of 2900rpm (50HZ). There are eight cutting holes on the cutterhead, so the cutting speed of up to 69,000 times / minute (2900X3X8). Figure 3 for the four-pole motor with the cutting system, triangular cutter and impeller speed 1450rpm (50HZ). There are 8 saw blades on the cutter, so the cutting speed of 34,000 times / min