Introduction to Stainless Steel submersible Pumps

Stainless steel submersible pump, is a pump directly connected with the wells with submersible pumps, direct submerged into the water to run. Structure slender. Single stage or multi-stage pump-type water-filled three-phase asynchronous motor submersible pump. It is specially developed for the drainage system of agricultural irrigation and drainage, sprinkler irrigation, industrial and civil construction. It is suitable for ponds, fish ponds, water towers, deep wells and high water and fountains.
    Applicable to enterprises and institutions such as: bath, district heating, business use of geothermal energy power generation, extraction of underground high temperature hot water, according to different diameter we have different specifications for the user to choose models. The device low noise, high efficiency and save energy.
Technical Parameters
    1: Allowable working water temperature range: +5 to + 105 ° C
    2: solid impurity content (mass ratio) is not more than 0.01%
    3: PH value (pH) 6.5-8.5
    4: hydrogen sulfide content of not more than 1.5mg / L
    5: chloride ion content of not more than 400mg / L
    6: the unit must be completely infiltrated without water work. Vertical use, select the model when the diameter and pump models to match, avoid large diameter diameter hole selection of small diameter pump, this is not conducive to the motor cooling.
material
    Impeller: cast iron HT200, or tin bronze (various grades) such as: ZCuSn3Zn8Pb6Ni1
    Pump housing: cast iron HT200, or stainless steel such as: 2Gr13 .304
    Pump shaft: cold drawn steel chrome, or stainless steel 2Gr13 (1050 ℃ quenched and tempered, reinforced torque)
    Motor seal: rubber seal O-ring; machine seal.
    Motor expansion adjustment bag rubber material.