Mixed flow pump used in the process of fever

Mixed flow pump how to use the process of fever? First of all, we have to look at what is clear where the heat, the general mixed flow pump is easy to heat where the bearings and packing, and then we have to find the cause of bearing or filler fever and the reasons for the corresponding reasons to solve.
Mixed flow pump bearing heat causes are:
1. Lubricant is insufficient. → this reason naturally need to refuel.
2. Lubricant quality is not good or not clean. → This requires cleaning the bearing to replace the appropriate lubricant.
3. The axis center is not aligned. → solution to find correct.
4. bearing wear. → to replace the bearing.
5. The belt is too tight. → it is appropriate to relax.
Mixed flow pump filler fever reasons are:
1. The packing is too tight and the tightness is tight. → we need to loose gland nuts, adjust the filler.
2. The packing is skewed so that the sleeve is unevenly rubbed. → You can loosen the gland and re-tighten it evenly.