The length of the high lift submersible pump is determined by the head of the pump. An impeller and a guide shell for the first assembly on the pump shaft, through the shaft key to the leaf guide wheel positioning and transmission of torque, multi-stage combination is completed, the pump at both ends with a compression sleeve compression. Impeller axial force from the wear-resistant material made of thrust pad to bear. To reduce the axial force, impeller and guide shell structure designed for the full floating or fixed, the remaining axial load and pump shaft weight by the protector thrust bearing bear, pump shaft selection of high strength Monel-k500 material.
High-lift submersible pump Features:
1, to use the whole floating structure-based, can effectively overcome the axial force on the impact of centrifugal pumps to extend the life of the pump.
2, leaf guide wheel material using nickel cast iron, with a strong wear and corrosion resistance.
3, leaf guide wheel special process design, making it a high efficiency and better sand control effect.
4, according to the needs of users to install centrifugal pump built-in strong magnetic cleaning device, which can effectively prevent scaling within the pump.
没有评论:
发表评论