Several coup about increasing the use of mixed flow pump

Increase the use of mixed flow pump time must be every mixed-flow pump users are fascinating things, in order to achieve must understand the basic knowledge of mixed-flow pump and the use of skills, today mixed flow pump manufacturers and talk about the flow of mixed-flow pump science Used to increase the use of mixed-flow pump 10 coup.
1, when the mixed-flow pump bearings with thin oil lubrication, we must always check the bearing body of the oil standard, always control the oil rod between the two marking; bearing grease lubrication, the time should be added to the amount of oil.
2, in the mixed flow pump work, pay attention to observe the bearing temperature, generally not higher than the ambient temperature of 40 degrees, the maximum does not exceed 80 degrees.
3, pay attention to whether the pump running friction and impact, such as pump cover and impeller friction, pump cover and pump can be increased between the paper pad, the time to use intermittent.
4, the packing must be adjusted, the liquid should be from the packing gland at the drop-like intermittent leakage. The packing is too tight, the shaft will heat and increase the power; the packing is too loose, the liquid leaks too much and the efficiency is reduced.
5, such as motor and mixed flow pump directly, the axis of the two axes should be in a straight line.
6, check the mixed flow pump water inlet and outlet phenomenon.
7, pay attention to whether the sudden increase in power or reduce the flow is suddenly reduced, there is such a phenomenon, should immediately stop the inspection.
8, often check whether the bolt for a long time and loose.
9, in the winter, after stopping to keep the mixed flow pump and water inside the water pipe.
10, for long-term suspension of the mixed flow pump, the operating part should be removed for rust treatment properly safe custody.
The scientific use of the mixed-flow pump has a positive effect on extending the use time of the mixed-flow pump, improper use, and easy to shorten the use time of the mixed-flow pump.