How to operate submersible pumps to safe right?

Submersible pumps are we in the industry and agriculture, and even in other industries to the equipment, but also often use the equipment, and a lot of operation is carried out at the water's edge, risk is high, so we must know how to operate correctly, can not only ensure the safety of the electric pump can also ensure our safety.

1, the water pump work, to pay attention to the situation of water levels fall, the pump shall not work outside the road out of the water.

2, try to avoid boot when low pressure. Power supply voltage and rated voltage is within 10%, can cause high voltage motor overheating and burning windings, the voltage is too low the motor speed is reduced.

3, do not let water pump overload for a long time, don't smoke sediment concentration of water, submersible electric pump is dehydrated, so as not to make the motor overheating and burning.

4, shall have the personnel on duty when pump is running, found the abnormal situation should immediately stop check.

5, pump drive and park, unfavorable too often. Pump available outside the bamboo network or cover barbed wire, prevent Wells have stone or other hard objects in the damage to the pump impeller.

6, to install the electric leakage protection device, because the water pump in the process of using easy leakage, if press on protection device will not easily allow the operator to get an electric shock.

7, after use must will be removed from the water pump, because if the soaking time is too long can lead to water pump corrosion rust.

We at the time of operation submersible pumps must be operated in accordance with the above method, so as to ensure our safety, ensure the service life of pump.