Stainless steel submersible pump maintenance is divided into three categories

China's stainless steel submersible pump maintenance is divided into three categories, the following for you one by one, I hope to help you:
First, the stainless steel submersible pump minor repair
1, mechanical seal: replacement, cleaning
2, check the bearing and oil room, replace the transformer oil
3, to eliminate the defects found in the operation and leakage, check and tighten the various bolts.
4, cleaning and maintenance of their own valves
Second, the stainless steel submersible pump in the repair:
1, including minor repair content
2, repair mechanical seal, repair and replacement parts
3, disintegration, check the parts of the wear and tear, corrosion and erosion degree, be repaired or replaced
4, check the shaft wear, corrosion and straightness, repair or replacement
5, check the bearing wear, scraping the bearing, adjust the gap, and replace the bearing
6, check and adjust the impeller seal ring, sleeve, gland, shaft seal and other parts of the gap.
7, check the impeller static balance and rotor dynamic balance.
8, check, clean and repair the motor.
Third, the stainless steel submersible pump overhaul:
1, including mediation content
2, more, good impeller
3, replace the pump shaft
4, the pump body thickness, identification, do the necessary repair
5, measuring and adjusting the level of the pump, rust and corrosion.